Location:
Downdraft permanent magnet pump
Generally, axial flow pumps have the motor at the bottom, the inlet in the middle, and the outlet above. This way, the suction height is high and cannot lower the water level to the lowest level. However, the water level of the downward suction inlet is low, which can lower the ground suction water level below 100mm.
Most axial flow pump set the motor at the bottom of body and water inlet at the middle of body, this make the suction water level high. This pump is with water inlet at the bottom,make the suction water level less than 100mm from ground.
Generally, axial flow pumps have the motor at the bottom, the inlet in the middle, and the outlet above. This way, the suction height is high and cannot lower the water level to the lowest level. However, the water level of the downward suction inlet is low, which can lower the ground suction water level below 100mm.
Most axial flow pump set the motor at the bottom of body and water inlet at the middle of body, this make the suction water level high. This pump is with water inlet at the bottom,make the suction water level less than 100mm from ground.
Generally, axial flow pumps have the motor at the bottom, the inlet in the middle, and the outlet above. This way, the suction height is high and cannot lower the water level to the lowest level. However, the water level of the downward suction inlet is low, which can lower the ground suction water level below 100mm.
Most axial flow pump set the motor at the bottom of body and water inlet at the middle of body, this make the suction water level high. This pump is with water inlet at the bottom,make the suction water level less than 100mm from ground.
